BindingmountingBefore you can start with the binding mounting, you need to know in what setting you want to fix the feet on the board. This is described in Chapter foot position. In general, bindings are fixed with four screws on the board. About the'' baseplate'' you adjust the binding angle.
The straps should be adjusted so that it can stretch enough and are not already in the loose condition at the stop. For binding mounting you also must adjust the setting of the highback. Usually can adjust the angle of the highback forward and backward in bonds. A steep adjusted highback provides a faster response when you lean back.
Central location on the boardIt is also important that the binding is mounted so that the foot is centered on the board. Toes and heels should be the same distance above the board.